Step-by-step instructions
Step 1
Empty the closet, sort what must return, and measure wall widths, door clearance, baseboards, and the longest garments.
Step 2
Map verified studs and utilities, then design shelf and rod spans within the hardware maker’s load limits.
Step 3
Create a cut list from actual material thickness and dry-fit components outside the closet.
Step 4
Install level standards or cleats into confirmed framing where possible, following anchor ratings where framing is unavailable.
Step 5
Add shelves and rods, secure anti-tip points, and confirm drawers or baskets clear doors and trim.
Step 6
Load the system gradually by zone and recheck deflection, fasteners, and access after several days.
Verify hidden utilities before drilling and do not overload shelves or rods. Tall units must be anchored to sound framing; consult a qualified professional if wall construction or required load capacity is uncertain.
