Workshop plan
Step-by-step instructions
1
Step 1
Record the hood model, manufacturer clearances, filter removal path, duct path, and cabinet measurements.
2
Step 2
Design a three-sided slipcover with an open service face and no contact with the hood body or controls.
3
Step 3
Cut lightweight panels, seal the finish, and use cleats that attach to adjacent cabinetry rather than the hood.
4
Step 4
Install with a removable fastening pattern, keeping the grease filter and light access unobstructed.
5
Step 5
Run the fan on each speed, check for heat and vibration, then remove the cover if it rattles or changes airflow.
Safety check
Do not cover the hood, filter, motor, light, or duct path. Disconnect power before working near wiring and follow the hood manufacturer’s clearance instructions.
