Workshop plan
Step-by-step instructions
1
Step 1
Measure the corner, door opening, rod height, and the deepest point that remains reachable.
2
Step 2
Cut shelves to an 8-inch depth, round the front edges, and seal the cut ends.
3
Step 3
Install cleats into studs or approved anchors, keeping shelf spacing aligned with the items to be stored.
4
Step 4
Add a small front lip so folded items cannot slide into the door path.
5
Step 5
Load the shelves progressively and verify they do not flex or interfere with hangers.
Safety check
Use appropriate anchors for the wall type and do not overload narrow shelves above head height.
