Step-by-step instructions
Step 1
Confirm the branch circuit, control method, ceiling height, fan listing, and an existing box specifically marked as fan-rated; a light-fixture box is not automatically adequate.
Step 2
Shut off the breaker, prevent re-energization, verify de-energization with an appropriate tester, and support the existing fixture while disconnecting it.
Step 3
Install or verify the listed fan brace and box without modifying structural framing beyond the approved system; stop if support or wiring is uncertain.
Step 4
Assemble the downrod, canopy, and mounting bracket on the ground where possible, following the fan’s manual and safety-pin sequence.
Step 5
Make only the documented conductor connections, secure the fan to the rated support, and install blades with matched hardware and equal screw tension.
Step 6
Restore power, test all controls and directions, check for wobble or noise, and power down immediately if the box moves, wiring heats, or the fan behaves abnormally.
Ceiling-fan installation combines electrical and overhead structural support work. Shut off power and verify it is off. Use only a listed fan-rated box/support, and consult a licensed electrician or qualified installer if wiring, grounding, controls, or support are uncertain.
