Step-by-step instructions
Step 1
Inventory tools and weights, then choose a panel and hook system rated for the heaviest items.
Step 2
Locate verified studs and utilities, mark panel edges level, and preserve clear access to outlets and controls.
Step 3
Cut the panel and spacer frame, seal raw edges if needed, and predrill structural fastening points.
Step 4
Attach spacers and panel into framing with the specified fastener pattern so hooks have clearance behind the board.
Step 5
Install compatible hooks with retaining clips, placing heavy or sharp tools low and frequently used tools within easy reach.
Step 6
Load gradually, check panel movement, and inspect hooks and fasteners periodically.
Verify hidden utilities before drilling. Do not hang loads above the system rating or place unsecured sharp/heavy tools where they can fall onto people or vehicles.
