Step-by-step instructions
Step 1
Measure the entry path, door swing, footwear, baskets, and seated clearance, then establish the bench and cubby dimensions.
Step 2
Make a cut list using actual panel thickness and cut the sides, top, bottom, dividers, back, and seat.
Step 3
Dry-fit the carcass, confirm every cubby opening, then glue and fasten while checking square.
Step 4
Install the back and face frame or edge treatment, attach the seat, and ease exposed corners.
Step 5
Apply a washable finish to all accessible surfaces and allow the complete cure time.
Step 6
Level the bench in place, anchor it to verified framing, and test gradually before seating or loading cubbies.
Anchor the bench to sound framing, verify utilities before drilling, and do not allow climbing. Consult a qualified professional if safe anti-tip attachment or load capacity cannot be confirmed.
